NeoTer, a 100% Romanian TeraPlast concept, which guarantees:

- 10 years warranty*
- Certified product quality
- Average service life of 50 years
- Professional support services – calculation of materials needs, installtion teams, interventions and call centre, warranty and post-warranty support
- Delivery and assembly solutions
- Extended guarantees
- Civil liability insurance for products manufactured by TeraPlast SA
garantie neoter teraplast
Despre Neoter istoric vechime

Modern, new and, yet, used for thousands of years

Central heating with radiators has been introduced since 1930 and has since been used as a standard heating system for homes and subsequently for apartments, offices, industrial spaces, etc., remaining more or less unchanged over the past 8 decades.

However, underfloor heating, a modern choice for heating was introduced in the last decade and it is the experts’ recommendation, as it offers unparalleled benefits compared to the classic heating system using radiators, and at the same time, increased comfort and unrivalled luxury. Although it seems like a modern solution, it was invented centuries ago and was used successfully by the Romans: the floor was raised about 20 centimetres from the surface (the height can vary depending on the dwelling), being supported by pillars built out of brick and mortar. A furnace was built in the corner of the room, and the hot air from it circulated in the space under the floor.

Underfloor heating – advantages, benefits, myths

Linie de producție nouă, complet automatizată

TeraPlast este una dintre puținele companii din România care obține aceste produse din material PEX, cu barieră de oxigen, pe dimensiuni de țevi de la 16 până la 32 mm, printr-o linie de producție nouă, complet automatizată, pentru procesul de extrudare a țevilor PEX-a într-o singură etapă.

Linia de producție asigură depozitarea materialului și transportul, cântărirea gravimetrică (componente solide și lichide) și procesul de extrudare în sine. Cuptorul cu infraroșu pentru reticulare a țevilor, tehnologia de vid și răcire, dozarea corectă a cantității de peroxizi, coextrudarea stratului de barieră și adeziv de oxigen, sisteme control și bobinator automat, totul, într-un proces de fabricare inovativ, modern și sigur, eficient și complet automatizat.
teava-neoter-incalzire-pardoseala-teraplast
Performanța ridicată este și o rezultată a co-extrudării cu straturi suplimentare pe țeavă: un strat de barieră la oxigen (EVOH), un strat protector exterior (polietilenă) și straturile de adeziv. Stratul EVOH asigură impermeabilitatea la oxigen, agentul termic și instalațiile din sistem fiind protejate de coroziune.
Aspectul de precizie, monitorizare și siguranță, respectat pe tot parcursul producției, crearea, utilizarea și optimizarea rețetelor proprii - prin dozare gravimetrică multicomponentă, dar și a prezența cuptoarelor unice cu infraroșu - asigură o ghidare specifică a țevii și distribuția optimă a lungimii de undă a radiației infraroșii, contribuie la fabricarea unui produs PEX-a de înaltă calitate, cu performanțe ridicate, mai ales în cazul sistemelor de încălzire prin pardoseală, Neoter.
Gradul ridicat de reticulare al țevilor asigură rezistența pe termen lung la presiune dar și o flexibilitate ridicată și ușurință de instalare printr-o tehnică de măsurare a grosimii peretelui cu ultrasunete. Măsurarea este una foarte precisă - dimensiunea peretelui, ovalitatea, cu o precizie de 0.02 mm. Astfel, ne asigurăm că produsele rezultate îndeplinesc cele mai ridicate standarde de calitate.
Tehnologia utilizată asigură o stabilitate a produselor, și o durată de viață dovedită de peste 50 de ani, la temperatura recomandată (*durata medie de viață scade pe măsură ce aceste țevi sunt utilizate la aceste temperaturi constant ridicate).

Radiant System versus Convection System Differences

There are several types of heat-transfer, but the most common are radiant and convection systems. Radiant heating, a principle of operation of the underfloor heating system, is explained by the radiant mode in which the heat is distributed and by the “thermal comfort” achieved by this type of heating.

Radiators heat the air around them by convection – the air heated by a radiator rises to the ceiling and once this warm air has cooled, it “falls” to the ground level to be heated again by the convection of the radiator, thus creating a flow of air currents, warm and cold, distributed unevenly in the room, with warmer areas near the radiators and cooler at the bottom, at the floor level.

sistem_incalzire_grafic

Zoning – absolute control for each room



Underfloor heating brings a real advantage in the case of spaces where you want to control each room, depending on your needs, through individual thermostats, connected to the NeoTer application. In this way, it is very easy to remotely reduce the ambient temperature in the spaces you do not use, thus substantially reducing the consumption of natural gas, any time.
zonare temperatura neoter teraplast. Sistem complet de incalzire pardoseală NeoTer by TeraPlast
NeoTER QR Code

The NeoTer application is specially developed to have effective control over the temperature level you want.



Remote control, hourly and day scheduling (weekdays and weekends) and direct connection to the router of thermostats provide the user freedom to set up and optimize the NeoTer system according to its specific needs.
0
    Wishlist
    Coșul dvs este golRevenire la shop

    Subscribe to newsletter

    Stay up to date with our offers and tutorials